Direct replacement to your original unit
Plug-and-play, direct fit, easy installation.
Highest grade lamination materials.
Highest grade copper windings, resistant to 200 degrees Celsius.
Pick up pulsar coil included.
All products shipped are tested.
Condition: Aftermarket 100% Brand New
Type: Generator Stator Coil
OEM Replacement Part Number: 31120-459-921
Interior diameter : 35mm / 1.37"
Exterior diameter : 88mm / 3.46"
Thickness : 21mm / 0.82"
Other specifications :
Number of wires: 6
Number of pins: 7
Number of plugs: 4
Number of fixation holes: 3
For Honda CT110 Postie bike 1991-2013
1x Generator Stator Coil
Before installing your new stator
Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier.
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation.
All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.
Warranty Period:1 Years
Return:Goods can be returned within 60 days of receipt
24-Hour Support:Customer service throughout the day
Stator Alternator Magneto Fit for Husqvarna TC 65 SX 2017-2020 46239004000 Generic
Product delivered on time. Tracking information and communication good. Output from stator is higher than specified but it works fine so we'll see how it goes.
Stator Alternator Fit for Honda SXS700M2 SXS700M4 Pioneer 700 700-4 2014-2021 Generic
The stator assembly was a perfect fit easy to install and solved the charging problem I had.
Unit appears to be of high quality, fits perfectly. Nice that the unit comes with replacement screws, as the OEM recommends replacement. Remember to loctite them! I used silicone lubricant to assist in getting the plug through the primary hole, and that worked extremely well.