Brand new pickup/pulsar coil for you to repair your stator.
Direct replacement to your original unit.
Plug-and-play, direct fit, easy installation.
Often unavailable from the OEM manufacturer.
All products shipped are tested.
Condition: Aftermarket 100% Brand New
Type: Pick up pulsar coil
Bracket center to center: 35mm
Number of wires: 2
Number of plugs: 1
Number of pins: 2
Replacement Part Number:
Fit for Tohatsu MD40A 2002-2003
Fit for Tohatsu MD40B 2003-2011
Fit for Tohatsu MD40B (AQ) 2006
Fit for Tohatsu MD40B2 2010-2014
Fit for Tohatsu MD50A 2002-2003
Fit for Tohatsu MD50B 2002-2011
Fit for Tohatsu MD50B (AQ) 2006
Fit for Tohatsu MD50B2 2010-2014
Fit for Tohatsu MD70B 2002-2010
Fit for Tohatsu MD70B (AQ) 2006
Fit for Tohatsu MD75C2 2010-2014
Fit for Tohatsu MD90A 2002
Fit for Tohatsu MD90B 2003-2010
Fit for Tohatsu MD90B (AQ) 2006
Fit for Tohatsu MD90C2 2010-2014
1x Pick up pulsar coil
Not following these instructions may result in damaging the part or other components on your vehicle.
-By using a small soldering iron weld the wires to the ones on your OEM wiring harness.
-Insulate your solders with heat shrink.
-Before attempting to start your vehicle, adjusting the air gap is necessary for certain models.
-Rotate the fly wheel by hand so the raised node is lined up with the pick up /pulsar coil and adjust as close as possible, but no less than 0.010 in.
-If no spark or erratic spark, switch the wires at the plug.
Shipping Freight: Free & Fast to Australia
The Warehouse: Sydney Warehouse
Delivery Time: 3-8 Working Days
Returns: The buyer have right to return the item within 60 days after the receipt of the product.
24-Hour Online Service: If you need more helps, we are here for you.
Stator Alternator Magneto Fit for Husqvarna TC 65 SX 2017-2020 46239004000 Generic
Product delivered on time. Tracking information and communication good. Output from stator is higher than specified but it works fine so we'll see how it goes.
Stator Alternator Fit for Honda SXS700M2 SXS700M4 Pioneer 700 700-4 2014-2021 Generic
The stator assembly was a perfect fit easy to install and solved the charging problem I had.
Unit appears to be of high quality, fits perfectly. Nice that the unit comes with replacement screws, as the OEM recommends replacement. Remember to loctite them! I used silicone lubricant to assist in getting the plug through the primary hole, and that worked extremely well.