Description
Feature:
1:Synchronous rectification, conversion rate is 96% with very low heat.
2:Auto protect over voltage, over current, over temperature, short circuit, ,can work in normal condition when restored.
3:Poxy potting, seismic, water, moisture, dust, long term stable and reliable quality.
4:Thin, small size, high efficiency, easy installation.Aluminum alloy Shell waterproof 卢quality is stable and reliable.
Specifics:
Condition: 100% Brand New
Shell Material: Aluminum
Type:DC-DC Buck Converter
Input voltage: DC 48 V ( 30V-60V )
Output parameter : DC 12 V 0.25V
Output power: 20A 240W
Working temperature: (-40 忙`80忙)
Full load temperature rise: 50忙
Load regulation: 1%
Voltage regulation rate: 2%
Minimum pressure: 2V
Size(mm): 76 x 76 x 35
Pitch of holes:65mm
Diameter:6mm
Wire length:165mm
Note:
1.Please make sure there is sufficient input supply voltage and power,in order to ensure that the module can output enough voltage and power.
2.Please take with an average load, do not merge,if there are multiple output cables in the output port.
3.You need to pay attention to make the power module cool,if output is up to the maximum current value.
4.When it is more than 40忙,please make lower power, or enhance heat dissipation
5.In strict accordance with characters wiring, fuse the input voltage polarity,must not reversed, or it may damage the power supply module, when the output voltage polarity is reversed, it may damage electrical equipment.
Package Included:
1x DC-DC Converter
Delivery:
Free & Fast Shipping
Delivery Time: 2-8 Working Days
Warranty:
Warranty Period: 1 Years
Returns: The buyer have right to return the item within 60 days after the receipt of the product.
24-Hour Online Service: If you need more helps, we are here for you.
Customer Reviews
Didn’t work at all
Does its job perfectly, providing a stable and clean 12 volts from a higher dc voltage source.
I am using this between a 100W solar panel that puts out 17-18V in full sun, and this regulator puts out a nice 12.6-12.8V that I then run to a 12V vehicle fan to exhaust heat out of my shop when it is sunny out. When clouds come over the solar, this unit will put out what it can get from the solar panel, I have tested 4.4V output from the panel and regulator, and that was enough to keep my fan running. The regulator won't just cut off when it drops below the input and output specified voltage, so that may be something you need to worry about if your application requires a consent voltage. In the photo, you can see the regulator sharing the solar input with a charge controller. I went with this regulator so I could run the fan from the solar with no batteries attached.
Excellent product recommend this supplier
compact, easy to install, good performance.It's the plug&play model available for boosting 30v. Fortunately, it's a good one. Well made.Strongly recommended!